Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Jan 17, 2019

NSN 3040-00-001-6877 Shaft, Shouldered

MFG Part Numbers: 659448

Cross Reference Parts for NSN 3040-00-001-6877

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

659448

5 2 3 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 3040-00-001-6877 (3040000016877)

Item Name: SHAFT,SHOULDERED
Federal Supply Class (FSC): 3040
NIIN: 00-001-6877 (000016877)
Definition: A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
NMF Description: POWER TRANS SHAFTING/SHAFTS SUB1

Item Specifics

Federal Supply Class (FSC)
Miscellaneous Power Transmission Equipment
End Similarity
Not identical AAHN
First End Diameter
0.7500 inches nominal AMDL
First End Internal Thread Length
0.380 inches nominal AMER
First End Style
Internal threaded AAGZ
Material Document And Classification
Qq-s-763,class 303,cond a fed spec single material response MDCL
Material
Steel MATT
Largest Step Diameter
0.498 inches nominal CSPY
Overall Length
2.660 inches nominal ABHP
Step Quantity
4 ATPC
Surface Finish
125.0 microinches CSYM

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
8483105000 Transmission shafts and cranks, except camshafts and crankshafts Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Turkey
Turkey ZW
Department Of The Army
Department Of The Army ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Repairability H If condemned or uneconomically repairable, then dispose at intermediate level.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 126900 Power Trans Shafting/shafts
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 593 Motors and parts, (machinery and parts),(less than 35 feet)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC V Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling ASH Array No special handling required.

Item Identification | Miscellaneous Power Transmission Equipment

3040-00-001-6877, A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
3040 Dec 03, 1972 000016877 22914 (Shaft, Shouldered)

Shouldered Shafts Cross Reference

659448 Cage Code 05234

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: M21L5X-
SOS: SMS
INC: 22914
AAC: J
CRITL CODE: X
DEMIL CODE: A
S A: DS
MGMT CTL: -------
NIIN ASGMT: 03-DEC-72
QUP: 1
SLC: 0
UI: EA
CAGE: 05234
RNCC: 3
RNVC: 2

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management QD – Miscellaneous instruments
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Army Flag

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 M – Ammunition weapons, and tracked combat vehicles weapons, special weapons, chemical and fire control materiel
Material Category 2 2 – Stock fund secondary items
Material Category 3 1 – Reparable items (exclusive of insurance and provisioning items.) this code will be used to identify serviceable or unserviceable items of a durable nature which when unserviceable normally can be repaired economically by depots or lower echelons of maint
Material Category 4 & 5 L5 – Other managed component of tool set
Army Flag

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.
Similar parts: 3040-01-410-9204 3040-01-411-2792 3040-01-411-0673 3040-01-410-7183 3040-01-411-4194 3040-01-411-4191 3040-01-411-3341 3040-01-410-8102 3040-01-411-4197 3040-01-411-2140 3040-01-411-1924