Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: May 19, 2019

NSN 3110-00-003-9269 Cam Follower, Needle Bearing

MFG Part Numbers: HRS1C3, MS21432-3-3, HRS1C3

Cross Reference Parts for NSN 3110-00-003-9269

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

HRS1C3

5 1 5 1

MS21432-3-3

5 2 2 E

HRS1C3

5 9 5 1

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 3110-00-003-9269 (3110000039269)

Item Name: CAM FOLLOWER,NEEDLE BEARING
Federal Supply Class (FSC): 3110
NIIN: 00-003-9269 (000039269)
Definition: An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
NMF Description: BEARINGS/BUSHINGS NOI BALL/ROLLER

Item Specifics

Federal Supply Class (FSC)
Bearings Antifriction Unmounted
Material
Steel overall MATT
Nominal Thread Size
0.190 inches CQJX
Outer Ring Width
0.2760 inches minimum and 0.2810 inches maximum AGVT
Overall Length
0.8285 inches nominal ABHP
Special Features
0.070 in. dia cotter pin hole 0.147 in. from stud end,without means for relubrication FEAT
Overall Outside Diameter
0.4995 inches minimum and 0.5010 inches maximum ADGA
Stud Diameter
0.1885 inches minimum and 0.1900 inches maximum AGRJ
Stud Length
0.5315 inches nominal AGXF
Style Designator
Cam follower STYL
Surface Treatment Document And Classification
Qq-c-320,cl 2 fed spec single treatment response roller STDC
Surface Treatment Document And Classification
Qq-p-416,cl 2 fed spec all treatment responses exposed surfaces as mounted STDC
Surface Treatment
Cadmium exposed surfaces as mounted and chromate exposed surfaces as mounted SFTT
Surface Treatment
Chromium roller SFTT
Thread Class
3a AAJD
Thread Direction
Right-hand AAJF
Thread Length
0.3440 inches nominal AASA
Thread Quantity Per Inch
32 CMLP
Thread Series Designator
Unf THSD

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
8482400000 Needle roller bearings Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
United States
United States ZZ
Department Of The Navy
Department Of The Navy ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 114820 Bearings/bushings Noi Ball/roller
Less than a truck load rating LTL P 77.5
Water Commodity WCC 742 Bearings
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC V Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling ASH Array No special handling required.

Item Identification | Bearings, Antifriction, Unmounted

3110-00-003-9269, An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
3110 May 27, 1972 000039269 00040 (Cam Follower, Needle Bearing)

Needle Bearing Cam Followers Cross Reference

HRS1C3 Cage Code 3NPS1
SAE-AS39901 Cage Code 81343
MS21432-3 Cage Code 81343
HRS1C3 Cage Code 60380
MS21432-3-3 Cage Code 96906

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: SF9---V
SOS: SMS
INC: 40
WEAPON SYSTEM: AIRCRAFT, GALAXY C-5
AAC: J
CRITL CODE: X
DEMIL CODE: A
S A: DF
MGMT CTL: -------
NIIN ASGMT: 27-MAY-72
QUP: 1
SLC: 0
UI: EA
CAGE: 3NPS1
RNCC: 5
RNVC: 1

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management
Price Validation V – The current standard price has been validated. - the item has been analyzed in conjunction with the zero overpricing program and is in the accepted price range. -the item was procured under open competition and under the competitive arena the price is considered fair and reasonable. -zop or standard price challenges are permissible but must be supported by adequate justification.
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Navy Flag

Navy

Cognizance 9G – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Similar parts: 3110-00-966-7741 3110-00-964-8872 3110-00-965-8485 3110-00-967-2927 3110-00-966-9734 3110-00-966-7606 3110-00-965-9054 3110-00-967-2924 3110-00-966-4853 3110-00-966-9357 3110-00-967-0292