Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Jul 15, 2019

NSN 3120-00-001-9346 Bearing, Sleeve

MFG Part Numbers: 114RS216-4, 79107

Cross Reference Parts for NSN 3120-00-001-9346

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

114RS216-4

C 2 3 1

79107

C 2 1 5

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 3120-00-001-9346 (3120000019346)

Item Name: BEARING,SLEEVE
Federal Supply Class (FSC): 3120
NIIN: 00-001-9346 (000019346)
Definition: A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
NMF Description: BEARING/BUSHING O/T BALL/ROLLER I/S

Item Specifics

Federal Supply Class (FSC)
Bearings Plain Unmounted
Body Inside Diameter
0.6500 inches nominal ADAS
Body Outside Diameter
0.8450 inches minimum and 0.8500 inches maximum ADAR
Corner Shape
Square inside right corner BZLX
Corner Shape
Square outside right corner BZLX
Material
Steel comp 4340 overall MATT
Overall Length
0.5400 inches nominal ABHP
Material Document And Classification
Mil-s-5000 mil spec single material response overall MDCL
Special Features
Od surface of body polytetrafluoroethylene fabric coated 0.0400 in. max from left end surface of body FEAT
Style Designator
Solid, plain, no outside flanges STYL
Surface Finish
125.0 microinches overall CSYM
Surface Treatment Document And Classification
Qq-z-325 fed spec all treatment responses overall STDC
Surface Treatment
Zinc and chromate or zinc and phosphate overall SFTT

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
8482997090 Parts, nesoi, for roller bearings or for combined ball/roller bearings, nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Department Of The Army
Department Of The Army ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Repairability Z This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 114850 Bearing/bushing O/t Ball/roller I/s
Less than a truck load rating LTL Q 70.0
Less than a car load rating LCL W Rating variable
Water Commodity WCC 742 Bearings
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 5 Low sensitivity, category iv, aa&e, unclassified
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC V Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling ASH Array Protected cargo, other than that defined by the other special handling codes, including sensitive cargo, requiring hand-to-hand receipt and/or security precautions.

Item Identification | Bearings, Plain, Unmounted

3120-00-001-9346, A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
3120 Sep 29, 1972 000019346 13205 (Bearing, Sleeve)

Sleeve Bearings Cross Reference

114RS216-4 Cage Code 77272
79107 Cage Code 09455

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: T2200X-
SOS: SMS
INC: 13205
AAC: J
CRITL CODE: X
DEMIL CODE: A
S A: DA
MGMT CTL: T2200X-
NIIN ASGMT: 29-SEP-72
QUP: 1
SLC: 0
UI: EA
CAGE: 09455
RNCC: 3
RNVC: 2

Management

Army Flag

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 T – Industrial supplies (dla/gsa items)
Material Category 2 2 – Stock fund secondary items
Material Category 3 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5 00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item
Army Flag

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.
Similar parts: 3120-01-247-6906 3120-01-248-3317 3120-01-247-2803 3120-01-248-7142 3120-01-247-1115 3120-01-247-9265 3120-01-248-7145 3120-01-248-0478 3120-01-247-8543 3120-01-248-1956 3120-01-248-8430