Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Aug 18, 2019

NSN 5310-00-001-4823 Washer, Flat

MFG Part Numbers: 911625-3, 5710-3-7P, 5710-3

Cross Reference Parts for NSN 5310-00-001-4823

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

911625-3

2 2 3 1

5710-3-7P

2 9 5 1

5710-3

2 2 7 1

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-4823 (5310000014823)

Item Name: WASHER,FLAT
Federal Supply Class (FSC): 5310
NIIN: 00-001-4823 (000014823)
Definition: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
NMF Description: WASHER OR GASKETS, IRON OR STEEL,

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
Center Hole Shape Style
Round ABMX
Cross-sectional Shape Style
Rectangular AAGR
Hole Diameter
0.058 inches minimum and 0.068 inches maximum AAUB
Material Document And Classification
Qq-s-766 fed spec single material response overall MDCL
Material
Steel comp 302 overall MATT
Overall Diameter
0.096 inches minimum and 0.116 inches maximum ADAV
Peripheral Shape Style
Round ABMW
Surface Treatment Document And Classification
Qq-p-35 fed spec single treatment response overall STDC
Surface Treatment
Passivate overall SFTT
Thickness
0.007 inches nominal ABNM

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Canada
Canada ZC
Department Of The Air Force
Department Of The Air Force ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194160 Washer Or Gaskets, Iron Or Steel,
Less than a truck load rating LTL U 50.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-4823, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Sep 27, 1972 000014823 13393 (Washer, Flat)

Flat Washers Cross Reference

5710-3-7P Cage Code 86928
911625-3 Cage Code 06481
5710-3 Cage Code 86928

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: SF9SX-N
SOS: SMS
INC: 13393
WEAPON SYSTEM: AIRCRAFT, HORNET F/A-18
AAC: Z
CRITL CODE: X
DEMIL CODE: A
S A: DN
MGMT CTL: -------
NIIN ASGMT: 27-SEP-72
QUP: 0
SLC: 0
UI: EA
CAGE: 86928
RNCC: 3
RNVC: 2

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management SX – Brac mmac for oc-alc
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Similar parts: 5310-01-168-3933 5310-01-168-1797 5310-01-168-5397 5310-01-168-1217 5310-01-168-5541 5310-01-168-3074 5310-01-168-5542 5310-01-168-5379 5310-01-168-5378 5310-01-168-5338 5310-01-168-3071