Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Aug 17, 2019

NSN 5310-00-001-4825 Washer, Flat

MFG Part Numbers: 5710-18-16, 911625-26

Cross Reference Parts for NSN 5310-00-001-4825

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

5710-18-16

3 2 7 1

911625-26

3 2 3 1

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-4825 (5310000014825)

Item Name: WASHER,FLAT
Federal Supply Class (FSC): 5310
NIIN: 00-001-4825 (000014825)
Definition: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
NMF Description: WASHERS/GASKETS/PCKG DVCS NOI

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Not ITAR Controlled

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194120 Washers/gaskets/pckg Dvcs Noi
Less than a truck load rating LTL W Rating variable
Less than a car load rating LCL S 60.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC V Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-4825, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentItem Name Code (INC)
5310 Sep 27, 1972 13393 (Washer, Flat)

Flat Washers Cross Reference

5710-18-16 Cage Code 86928
911625-26 Cage Code 06481

Codes

COUNTRY CODE: 00
DML: A
HMIC: N
INC: 13393
CRITL CODE: X
DEMIL CODE: A
NIIN ASGMT: 27-SEP-72
CAGE: 06481
RNCC: 7
RNVC: 2
Similar parts: 5310-01-275-6697 5310-01-276-0881 5310-01-275-4546 5310-01-275-3323 5310-01-275-5982 5310-01-275-1891 5310-01-275-7781 5310-01-276-0879 5310-01-276-0050 5310-01-275-5012 5310-01-275-1840