Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Jul 19, 2019

NSN 5310-00-001-6725 Nut, Sleeve

MFG Part Numbers: 140974

Cross Reference Parts for NSN 5310-00-001-6725

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

140974

C 2 3 5

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-6725 (5310000016725)

Item Name: NUT,SLEEVE
Federal Supply Class (FSC): 5310
NIIN: 00-001-6725 (000016725)
Definition: An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.
NMF Description: BOLTS,NUTS OR SCREWS, NOI (SUB 3)

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
Boss Diameter
0.500 inches nominal ADBN
Boss Thickness
0.062 inches nominal ADBP
Cross-sectional Shape
Hexagonal nut ANLR
Cross-sectional Shape
Round boss ANLR
Material
Steel overall MATT
Nominal Thread Size
0.375 inches CQJX
Nut Length
0.110 inches nominal ACVN
Nut Style
Sleeve ACTA
Nut Width Across Flats
0.624 inches nominal AFGH
Thread Class
2b AAJD
Thread Direction
Right-hand AAJF
Thread Quantity Per Inch
16 CMLP
Thread Series
Unc BZRR

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318160000 Nuts of iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Germany
Germany ZG
Greece
Greece ZU
Turkey
Turkey ZW
Defense Logistics Agency
Defense Logistics Agency ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 093486 Bolts, Nuts Or Screws, Noi (sub 3)
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 573 Bolts or nuts (iron or steel),(less than 35 feet)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-6725, An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Sep 24, 1972 000016725 29735 (Nut, Sleeve)

Sleeve Nuts Cross Reference

140974 Cage Code 24821

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: -------
SOS: SMS
INC: 29735
WEAPON SYSTEM: FMS - KNOX CLASS FF
AAC: J
CRITL CODE: X
DEMIL CODE: A
S A: DN
MGMT CTL: 9B-----
NIIN ASGMT: 24-SEP-72
QUP: 0
SLC: 0
UI: EA
CAGE: 24821
RNCC: 3
RNVC: 2

Management

Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Similar parts: 5310-01-486-0415 5310-01-485-9285 5310-01-485-9052 5310-01-486-1132 5310-01-486-1025 5310-01-485-9599 5310-01-486-0043 5310-01-485-9247 5310-01-485-9696 5310-01-485-8753 5310-01-485-9239