Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Jan 02, 2019

NSN 5310-00-001-9766 Washer, Flat

MFG Part Numbers: 696692, S9011F107-050, 696692, S9011F107-050

Cross Reference Parts for NSN 5310-00-001-9766

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

696692

1 8 E 5

S9011F107-050

1 8 E 2

696692

1 9 5 1

S9011F107-050

1 2 3 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-9766 (5310000019766)

Item Name: WASHER,FLAT
Federal Supply Class (FSC): 5310
NIIN: 00-001-9766 (000019766)
Definition: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
NMF Description: WASHER OR GASKETS, IRON OR STEEL,

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
Center Hole Shape Style
Round ABMX
Cross-sectional Shape Style
Rectangular AAGR
Hole Diameter
0.139 inches minimum and 0.145 inches maximum AAUB
Material
Steel comp 321 overall or steel comp 301 overall or steel comp 302 overall or steel comp 304 overall or steel comp 316 overall MATT
Overall Diameter
0.495 inches minimum and 0.505 inches maximum ADAV
Material Document And Classification
Mil-s-6721 mil spec 1st material response overall and mil-s-5059 mil spec 2nd material response overall and mil-s-5059 mil spec 3rd material response overall and mil-s-5059 mil spec 4th material response overall and mil-s-5059 mil spec 5th material response overall MDCL
Peripheral Shape Style
Round ABMW
Thickness
0.050 inches nominal ABNM

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Department Of The Air Force
Department Of The Air Force ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194160 Washer Or Gaskets, Iron Or Steel,
Less than a truck load rating LTL U 50.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-9766, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Oct 04, 1972 000019766 13393 (Washer, Flat)

Flat Washers Cross Reference

S9011F107-050 Cage Code 59364
696692 Cage Code 77445
696692 Cage Code 27068
S9011F107-050 Cage Code 99193

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: T2200X-
SOS: SMS
INC: 13393
WEAPON SYSTEM: AIRCRAFT, B-1B
AAC: Z
CRITL CODE: X
DEMIL CODE: A
S A: DA
MGMT CTL: SF9SX-N
NIIN ASGMT: 04-OCT-72
QUP: Q
SLC: 0
UI: EA
CAGE: 27068
RNCC: E
RNVC: 8

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management SX – Brac mmac for oc-alc
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Marines Flag

Marines

Stores Account 1 – Marine corps stock fund account item.
Combat Essentiality 5 – Critical repair part to a combat essential end item. those parts or components whose failure in a combat essential end item wi
Management Echelon B – All commodities
Material Identification
Operational Test
Physical Category
Marines Flag

Marines Code Definition

Stores Account (SAC) Indicates the type of funds employed within the marine corps in supply support operations.
Combat Essentiality (CEC) Establishes if an item is essential to the operational readiness of a weapon system or the conduct of a military mission, or that a functional part contributes to the tactical and essential operations of an item component or assembly, and its failure would render the item inoperable or incapable of fulfilling its mission.
Management Echelon (MEC) Classifies items into categories by material and procurement echelon.
Material Identification (MIC) Identifies method of accounting, degree, and type of control to be maintained for the item and to identify material by specific purpose, type, or classification for the war reserve system.
Operational test (OTC) Indicates special procedures must be performed on an item of supply while under care-in-stores or as a part of the issue process.
Physical Category (PCC) Indicates category for picking, packing, and marking items for shipment.
Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Army Flag

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 T – Industrial supplies (dla/gsa items)
Material Category 2 2 – Stock fund secondary items
Material Category 3 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5 00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item
Army Flag

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.
Similar parts: 5310-01-300-1755 5310-01-300-1518 5310-01-299-9755 5310-01-299-7627 5310-01-300-1513 5310-01-300-2680 5310-01-300-2683 5310-01-300-1822 5310-01-300-1324 5310-01-299-7762 5310-01-300-0944