Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Aug 20, 2019

NSN 5310-00-001-9787 Washer, Flat

MFG Part Numbers: S8154-37C025, S8154-37C025

Cross Reference Parts for NSN 5310-00-001-9787

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

S8154-37C025

2 2 3 2

S8154-37C025

2 9 5 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-9787 (5310000019787)

Item Name: WASHER,FLAT
Federal Supply Class (FSC): 5310
NIIN: 00-001-9787 (000019787)
Definition: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
NMF Description: BOLTS/NUTS/SCREWS NOI I/S

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
Center Hole Shape Style
Round ABMX
Cross-sectional Shape Style
Rectangular AAGR
Hole Diameter
0.280 inches minimum and 0.290 inches maximum AAUB
Material
Steel comp 301 overall MATT
Overall Diameter
0.624 inches minimum and 0.625 inches maximum ADAV
Material Document And Classification
Mil-s-5059,cond 1/4 hard mil spec single material response overall or mil-s-5059,cond 1/2 hard mil spec single material response overall or mil-s-5059,cond h mil spec single material response overall MDCL
Peripheral Shape Style
Round ABMW
Specification/standard Data
70210-s8154 manufacturers standard ZZZK
Surface Finish
63.0 microinches bottom CSYM
Surface Finish
63.0 microinches top CSYM
Thickness
0.022 inches minimum and 0.028 inches maximum ABNM

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Defense Logistics Agency
Defense Logistics Agency ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 093486 Bolts, Nuts Or Screws, Noi (sub 3)
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 576 Metal and metal products, nos, (less than 35 feet)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-9787, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Oct 04, 1972 000019787 13393 (Washer, Flat)

Flat Washers Cross Reference

S8154-37C025 Cage Code 59364
S8154-37C025 Cage Code 99193

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: -------
SOS: SMS
INC: 13393
AAC: V
CRITL CODE: X
DEMIL CODE: A
S A: DS
MGMT CTL: -------
NIIN ASGMT: 04-OCT-72
QUP: Q
SLC: 0
UI: EA
CAGE: 59364
RNCC: 3
RNVC: 2

Management

Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Similar parts: 5310-01-217-5205 5310-01-217-7737 5310-01-218-1466 5310-01-218-1344 5310-01-218-0981 5310-01-217-6004 5310-01-217-7780 5310-01-217-7776 5310-01-217-6003 5310-01-217-7785 5310-01-217-9596