Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Aug 20, 2019

NSN 5310-00-001-9919 Washer, Flat

MFG Part Numbers: 545C473P56

Cross Reference Parts for NSN 5310-00-001-9919

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

545C473P56

2 2 3 5

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-001-9919 (5310000019919)

Item Name: WASHER,FLAT
Federal Supply Class (FSC): 5310
NIIN: 00-001-9919 (000019919)
Definition: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
NMF Description: WASHER OR GASKETS, IRON OR STEEL,

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
Center Hole Shape Style
Round ABMX
Color
Black overall HUES
Cross-sectional Shape Style
Rectangular AAGR
Hole Diameter
0.126 inches minimum and 0.131 inches maximum AAUB
Material
Steel comp 1010 overall MATT
Overall Diameter
0.350 inches minimum and 0.390 inches maximum ADAV
Material Document And Classification
Ams 5040 assn std single material response overall MDCL
Peripheral Shape Style
Round ABMW
Surface Treatment Document And Classification
Qq-p-416,ty 2,cl 3 fed spec single treatment response overall STDC
Surface Treatment
Cadmium overall SFTT
Thickness
0.030 inches minimum and 0.035 inches maximum ABNM

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Defense Logistics Agency
Defense Logistics Agency ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194160 Washer Or Gaskets, Iron Or Steel,
Less than a truck load rating LTL U 50.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-001-9919, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Sep 29, 1972 000019919 13393 (Washer, Flat)

Flat Washers Cross Reference

545C473P56 Cage Code 89954

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: SF9SX-N
SOS: SMS
INC: 13393
AAC: V
CRITL CODE: X
DEMIL CODE: A
S A: DS
MGMT CTL: SF9SX-N
NIIN ASGMT: 29-SEP-72
QUP: Q
SLC: 0
UI: EA
CAGE: 89954
RNCC: 3
RNVC: 2

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management SX – Brac mmac for oc-alc
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Similar parts: 5310-01-358-3668 5310-01-358-3664 5310-01-358-4303 5310-01-358-5546 5310-01-358-4532 5310-01-358-5548 5310-01-358-5973 5310-01-358-4597 5310-01-358-6627 5310-01-358-6552 5310-01-358-6624