Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Mar 24, 2019

NSN 5310-00-003-2786 Nut, Sleeve

MFG Part Numbers: 546-7003-002

Cross Reference Parts for NSN 5310-00-003-2786

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

546-7003-002

6 2 3 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5310-00-003-2786 (5310000032786)

Item Name: NUT,SLEEVE
Federal Supply Class (FSC): 5310
NIIN: 00-003-2786 (000032786)
Definition: An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.
NMF Description: BOLTS,NUTS OR SCREWS, NOI (SUB 3)

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7616995095 Articles of aluminum nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Not ITAR Controlled

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 093486 Bolts, Nuts Or Screws, Noi (sub 3)
Less than a truck load rating LTL W Rating variable
Less than a car load rating LCL U 50.0
Water Commodity WCC 573 Bolts or nuts (iron or steel),(less than 35 feet)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Nuts And Washers

5310-00-003-2786, An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. for items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. for items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). excludes nut (1), plain, cap. see also turnbuckle body.

Supply Class (FSC)NSN AssignmentItem Name Code (INC)
5310 May 21, 1972 29735 (Nut, Sleeve)

Sleeve Nuts Cross Reference

546-7003-002 Cage Code 13499

Codes

COUNTRY CODE: 00
DML: A
HMIC: N
INC: 29735
CRITL CODE: X
DEMIL CODE: A
NIIN ASGMT: 21-MAY-72
CAGE: 13499
RNCC: 3
RNVC: 2
Similar parts: 5310-01-366-7090 5310-01-366-5373 5310-01-366-5176 5310-01-366-5372 5310-01-366-5369 5310-01-366-7583 5310-01-366-6437 5310-01-366-7487 5310-01-366-6436 5310-01-366-3556 5310-01-366-5368