Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Jul 23, 2019

NSN 5365-00-003-1568 Spacer, Sleeve

MFG Part Numbers: A51M42534-11, A51M42534-11

Cross Reference Parts for NSN 5365-00-003-1568

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

A51M42534-11

2 2 3 A

A51M42534-11

2 9 3 A

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5365-00-003-1568 (5365000031568)

Item Name: SPACER,SLEEVE
Federal Supply Class (FSC): 5365
NIIN: 00-003-1568 (000031568)
Definition: A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).
NMF Description: SHAFTS/SHAFTING,FLEX NOI STL

Item Specifics

Federal Supply Class (FSC)
Bushings Rings Shims And Spacers
Body Inside Diameter
0.2570 inches minimum and 0.2620 inches maximum ADAS
Body Outside Diameter
0.4357 inches minimum and 0.4367 inches maximum ADAR
Corner Shape
Square all corners BZLX
Material
Steel comp 4330 overall MATT
Material Document And Classification
G-1010,cagec 26512 mfr ref single material response overall MDCL
Overall Length
1.7190 inches minimum and 1.7290 inches maximum ABHP
Style Designator
Solid, plain, no outside flanges STYL
Surface Treatment Document And Classification
Qq-c-320 fed spec single treatment response overall STDC
Surface Treatment
Chromium overall SFTT

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7326908595 Other articles of iron or steel not wire nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Department Of The Navy
Department Of The Navy ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator A Item does not contain precious metal.
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 129920 Shafts/shafting, Flex Noi Stl
Less than a truck load rating LTL M 85.0
Water Commodity WCC 671 Aircraft parts, to include test/tool sets and equipment (other than armament systems)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC A Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc.
Air Special Handling ASH Array No special handling required.

Item Identification | Bushings, Rings, Shims, And Spacers

5365-00-003-1568, A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5365 May 21, 1972 000031568 13207 (Spacer, Sleeve)

Sleeve Spacers Cross Reference

A51M42534-11 Cage Code 26512
A51M42534-11 Cage Code 61174

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: SF9SX-N
SOS: SMS
INC: 13207
AAC: V
CRITL CODE: X
DEMIL CODE: A
S A: DN
MGMT CTL: SF9SX-N
NIIN ASGMT: 21-MAY-72
QUP: 1
SLC: 0
UI: EA
CAGE: 26512
RNCC: 3
RNVC: 2

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management SX – Brac mmac for oc-alc
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Navy Flag

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content
Navy Flag

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
Similar parts: 5365-00-241-8042 5365-00-241-9891 5365-00-241-9920 5365-00-241-7578 5365-00-241-9960 5365-00-241-9939 5365-00-241-6969 5365-00-241-6979 5365-00-241-3825 5365-00-241-9869 5365-00-242-0002