Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Mar 23, 2019

NSN 5365-00-003-1718 Shim

MFG Part Numbers: 40S400E100-300, 40S400E100-300

Cross Reference Parts for NSN 5365-00-003-1718

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

40S400E100-300

2 9 3 2

40S400E100-300

2 1 C 9 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5365-00-003-1718 (5365000031718)

Item Name: SHIM
Federal Supply Class (FSC): 5365
NIIN: 00-003-1718 (000031718)
Definition: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NMF Description: MACHINERY/MACHINES NOI

Item Specifics

Federal Supply Class (FSC)
Bushings Rings Shims And Spacers

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7507200000 Tube or pipe fittings of nickel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
Singapore
Singapore YJ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 133300 Machinery/machines Noi
Less than a truck load rating LTL W Rating variable
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC V Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling ASH Array No special handling required.

Item Identification | Bushings, Rings, Shims, And Spacers

5365-00-003-1718, A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

Supply Class (FSC)NSN AssignmentItem Name Code (INC)
5365 May 24, 1972 20349 (Shim)

Shims Cross Reference

40S400E100-300 Cage Code 0JRC1
40S400E100-300 Cage Code 76823

Codes

COUNTRY CODE: 00
DML: A
HMIC: N
INC: 20349
CRITL CODE: X
DEMIL CODE: A
NIIN ASGMT: 24-MAY-72
CAGE: 76823
RNCC: 3
RNVC: 9
Similar parts: 5365-00-225-7031 5365-00-226-1090 5365-00-224-1726 5365-00-225-2801 5365-00-225-7909 5365-00-224-1037 5365-00-225-3402 5365-00-224-1561 5365-00-225-3422 5365-00-226-1840 5365-00-225-0761