Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: May 20, 2019

NSN 5365-00-003-1835 Spacer, Plate

MFG Part Numbers: 690672-1

Cross Reference Parts for NSN 5365-00-003-1835

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

690672-1

C 2 3 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5365-00-003-1835 (5365000031835)

Item Name: SPACER,PLATE
Federal Supply Class (FSC): 5365
NIIN: 00-003-1835 (000031835)
Definition: A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
NMF Description: SPACERS/SEPARATORS I/S NOI TUBULAR

Item Specifics

Federal Supply Class (FSC)
Bushings Rings Shims And Spacers

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7616995095 Articles of aluminum nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
New Zealand
New Zealand ZE

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 106940 Spacers/separators I/s Noi Tubular
Less than a truck load rating LTL T 55.0
Less than a car load rating LCL T 55.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC Z Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC A Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc.
Air Special Handling ASH Array No special handling required.

Item Identification | Bushings, Rings, Shims, And Spacers

5365-00-003-1835, A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.

Supply Class (FSC)NSN AssignmentItem Name Code (INC)
5365 May 21, 1972 26979 (Spacer, Plate)

Plate Spacers Cross Reference

690672-1 Cage Code 96214

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: -------
SOS: SMS
INC: 26979
AAC: Y
CRITL CODE: X
DEMIL CODE: A
S A: DS
MGMT CTL: -------
NIIN ASGMT: 21-MAY-72
QUP: 1
SLC: 0
UI: EA
CAGE: 96214
RNCC: 3
RNVC: 2
Similar parts: 5365-01-381-1102 5365-01-381-1327 5365-01-380-9102 5365-01-381-1092 5365-01-381-1325 5365-01-381-1094 5365-01-380-9226 5365-01-380-8062 5365-01-380-9140 5365-01-380-6619 5365-01-380-7349