Can't Find Your Part? Enter Your NSN or PART Number Here:

Last Modified: Mar 21, 2019

NSN 5365-00-003-1914 Shim

MFG Part Numbers: 93792-005

Cross Reference Parts for NSN 5365-00-003-1914

MFG Part Number ISC RNVC RNCC HCC MSDS SADC DAC

93792-005

2 2 3 2

Request A Quote

Part:
Qty:
Email:

Part Information for NSN 5365-00-003-1914 (5365000031914)

Item Name: SHIM
Federal Supply Class (FSC): 5365
NIIN: 00-003-1914 (000031914)
Definition: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NMF Description: WASHERS/GASKETS/PCKG DVCS NOI SUB3

Item Specifics

Federal Supply Class (FSC)
Bushings Rings Shims And Spacers
Aperture Diameter
1.500 inches minimum and 1.510 inches maximum ABVL
Bolt Circle Diameter
1.870 inches nominal ABKG
Bolt Hole Quantity
3 AECS
Construction
One-piece CQCF
Hardness Rating
40.0 rockwell c maximum CQFM
Hole Diameter
0.220 inches nominal AAUB
Material
Steel corrosion resisting MATT
Outside Corner Inverted Radius
0.250 inches nominal ADUU
Outside Corner Radius
0.250 inches nominal ADPW
Side Radius From Gasket Center
0.875 inches nominal ADVC
Overall Width
2.370 inches nominal ABMK
Style Designator
Non-circular w/aperture STYL

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7326908595 Other articles of iron or steel not wire nesoi Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
United States
United States ZZ
Defense Logistics Agency
Defense Logistics Agency ZZ

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194120 Washers/gaskets/pckg Dvcs Noi Sub3
Less than a truck load rating LTL C 250.0
Less than a car load rating LCL J 100.0
Water Commodity WCC 576 Metal and metal products, nos, (less than 35 feet)
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC Z Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Item Identification | Bushings, Rings, Shims, And Spacers

5365-00-003-1914, A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5365 May 13, 1972 000031914 20349 (Shim)

Shims Cross Reference

93792-005 Cage Code 11599

Codes

COUNTRY CODE: 00
CIIC: U
DML: A
HMIC: N
MGMT CTRL: SF9OK-N
SOS: SMS
INC: 20349
AAC: J
CRITL CODE: X
DEMIL CODE: A
S A: DF
MGMT CTL: -------
NIIN ASGMT: 13-MAY-72
QUP: 1
SLC: 0
UI: EA
CAGE: 11599
RNCC: 3
RNVC: 2

Management

Air Force Flag

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management OK – G.e. jet engines and components
Price Validation N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Flag

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.
Similar parts: 5365-00-754-1802 5365-00-757-2988 5365-00-756-1402 5365-00-755-7250 5365-00-757-2197 5365-00-757-2729 5365-00-754-2214 5365-00-756-4111 5365-00-757-1952 5365-00-756-9741 5365-00-754-4697